Kenmore washer error code f21

Kenmore washer error code f21

This happens when the drain time exceeds 8 minutes. Also, there SUDS indication may appear. It means that there is a clog in the drain line or the drain pump is faulty. Try to reset your machine by unplugging it for about 30 minutes and plugging it back again. If the CCU fails to reset, check the drain hose: not unlikely, it is kinked or clogged. Check all connections and make sure that the pump is working properly. Remove the filter and remove foreign objects and debris, if any. Remove the drain plug from the filter.

  1. Remove the lower front panel, then the bottom front access panel. Undo the 3 Torx screws. Lift.Remove the bottom front access panel just remove the 3 Torx screws on front bottom of machine. Lift the panel and pull the bottom panel toward yourself.
  2. Remove the pump filter cover by turning it counter-clockwise and pulling it off. Some dirty water will pour out, so get a bucket ready. Once the filter is removed, all water remaining in the machine will get out.