Samsung Dishwasher Error Code SE (5E)

Drain error

Display Samsung Dishwasher Error Code SE (5E)

Samsung Dishwasher Error Code SE (5E)Samsung Dishwasher Error Code SE (5E)Samsung Dishwasher Error Code SE (5E)Samsung Dishwasher Error Code SE (5E)

Description Samsung Dishwasher Error Code SE (5E)

OCCURRING CONDITIONWhen OFF status of Low-Level S/W is not detected within 3 minutes during the drain.
EXPECTED CONDITIONAlien particles are clogging in the drain hose.
Drain pump terminal is not connected.
Possible defect: Drain pump, Water-level sensor, Main PBA.
Check whether the drain hose is clogged or folded. If the problem continues, close the water supply valve, and then contact an authorized Samsung service center.


Error TypeError modeChecking MethodCorrective actions
Drain error5E or “Delicate” LED (DMT400, DW80F600) or “Quick+” LED (DW7933)
1. Check whether there is any foreign material in the Drain Hose- Remove the foreign material from the Drain Hose
2. Check the operation of the Water-level sensor- See the “Low-level water error”
3. Check the connections for the Drain Pump connector- Reconnect the Drain Pump connector
4. Check whether the Drain Pump coil is conductive. (Remove the connector before measuring.)
• Normal: Approx. 25 Om
- Faulty: Replace the Drain Pump
5. Check the operation of the Drain Pump Relay : Check the operating voltage between the yellow wire of the Main PBACN101 connector and the orange wire of the CN202 connector
• Normal: 120V (while operating)
- Faulty: Replace the Main PBA assy
- Normal: Replace the Drain Pump
- Remove retainer
- Check voltage
Samsung Dishwasher Error Code SE (5E)