X

The most common codes on Samsung washing machines

Sooner or later, owners of Samsung washing machines are faced with the appearance of emergency codes on the display. In this article, you will learn what they mean and how to remove them. The appearance of codes indicates the presence of problems in the operation of household appliances. Once you eliminate them, they will disappear. If this does not happen, you will have to contact the service center. You may not be able to solve all problems on your own.

The most common Samsung washing machine emergency codes

We have combined codes that indicate the same problem. Different washing machines differ slightly.

Nd, SE, 5E, SC, 5C, 1 5C

Water does not leave the drum. Within a few minutes, the machine failed to drain it. First of all, check the drain filter, which is located at the bottom of the machine on the left or right. Make sure that it is not clogged by first draining the water from the machine. If you hear a rattling sound, then the pump is at the end of its life. The motor impeller is not fixed securely on the shaft, it slips off. Change the pump.

LO, DS, D5, LO, L0, FL, DE, DE2, Dc, DL, DE1, 1DC, 1dC1, 1dC4

The codes indicate a problem with the door lock. It doesn’t lock up. You need to change it, it’s easy to do it yourself. After that, the error code will disappear.

4C, NF, 4E, 1-4C

Water from the tap does not enter the machine. The problem may be related to the water supply valve, pinched hose, shut off the water tap. Check if the water has been turned off and if the taps are open. Look behind the machine. Make sure that the hose is not obstructed, kinked or kinked. If everything is in order, remove the top cover and check the inlet valves for integrity using a multimeter. Ring the electrical circuit, check its continuity. If you get a value of 0, work to replace the valve. He could fail for various reasons. Sometimes water is collected, but for a very long time or in insufficient quantities.

1E, LE, 1C, LC, 1 1C, 1 LC, LC1

The appearance of such codes obliges you to pay attention to the drain hose and the water level sensor. The hose is most likely clogged or loose on the drum, causing the sensor to incorrectly read the remaining water inside.

Move the washing machine away to access the hose. Disconnect it. Look inside and make sure there is no blockage. If it is, blow out the hose or connect it to a faucet and apply water pressure.

Replace the water level sensor in the machine. It is located under the top cover of the case, has a round base. Before carrying out any work, disconnect the equipment from electricity.

OE, 0E, OC, 1OC, 10C, 0C,

The water level in the drum is out of specification. There are two reasons:

  1. The valve that opens when water is drawn in and drained is out of order or works with restrictions.
  2. Non-working pressure switch.

If you did not turn on the machine, and water still appears inside, then the inlet valve does not fulfill its function to the fullest. Its normal position is closed. To make the codes disappear and not appear again, replace the intake valve or repair.

Inspect the sensor that detects the water level. Look at the reliability of the drain hose to it.

SUd, Sd, 5d, 5UD, SUdS, 5Ud5

Excess foam formation. This is due to improperly selected detergent or its large amount. If foam comes out, turn off the machine and wait a few minutes. Take out the clothes, remove the foam, remove excess detergent, restart the wash cycle. For the future use products with low foaming.

Ub, U6, UE, 1 Ub, Ur, 1U6

The error indicates that the washing machine cannot properly distribute the load inside the drum. The occurrence of codes is accompanied by a knock. Codes also appear when the machine fails to complete the process of drying things.

Load things correctly. No need to collect them in a lump and shove them. Place inside in turns so that the laundry is evenly distributed. Do not exceed the amount of things. Look at how many kilograms the machine is designed for and stick to these parameters.

ihor: