Your washing machine should be working on a 24/7 basis: this is an irreplaceable home appliance. If you experience some problems with your Haier washing machine, don’t hurry to call the repairmen. In most cases, troubleshooting can be performed on one’s own. The repair instructions below are simple and comprehensible: they will help you to fix the washer quickly.
The instructions are present in the form of tables for readers to understand and follow them easier. Troubleshooting process for different models of Haier washing machines is described: the most popular devices are covered. The tables enlist most widespread technical problems, possible causes and ways to eliminate the issues. The instructions are short but enough to deal with malfunctions efficiently.
Besides, the tables also contain error codes with explanations. Any time you see the error code displayed on the monitor, you’ll be able to define the malfunction in a jiffy. The instructions are provided by the official manufacturer, they are 100% correct and comprehensible for an average user.
Please, note that some troubleshooting tables do not mention the ways to solve problems. Therefore, if you aren’t able to solve the issue on your own, don’t hesitate to contact the service center, or third-party maintenance companies. The issues with washing machine software should be corrected by a professional only.
Haier AWD-D700T washer error codes
| Trouble Indication | Kind Of Trouble | Where To Check | How to resolve the problem |
|---|---|---|---|
| __ | The washer does not work at all. | • Check if the Power Cord is securely plugged in. | |
| • Press the POWER ON/OFF button. | |||
| • Press the START/PAUSE button. | |||
| • Press the PRESET button. | |||
| • Check whether power failure occurs | |||
| • Check whether the fuse or circuit breaker has been activated. | |||
| E11 | Water does not flow into the Wash/Spin Tub or water flow is slim. | • Whether the faucet be opened. | Check and resolve the problem .then press START/PAUSE for one times to restart the washer. |
| • Whether the Water Supply Hose be frozen. | |||
| • Whether the Water Supply Hose or the metal filter in water inlet be blocked. | |||
| • Whether the water is out of supply. | |||
| E12 | Water does not drain out | • The height of drain hose is more than 100 mm. | Check and resolve the problem .then press START/PAUSE for one times to restart the washer. |
| • Whether the Drain Hose is inverted. | |||
| • Whether the Drain Hose is blocked by scrap of fiber. | |||
| • Whether the Drain Hose is too long. | |||
| H | Failure of open the washer door. | • Whether the temperature of water exceeded 40 °C. | The door will open automatically as soon as the temperature below 40 °C. |
| • Whether the temperature of water in washing process exceeded 40°C. | |||
| U3 | Failure of spin | • Whether the washing machine be posited steadily. | When the clothes is too little, add 2-3 pieces of clothes, then check the machine, Close the door, and press START/PAUSE button for one times to restart the machine. |
| • Whether the washing clothes is too big or too heavy. | |||
| • Whether the pieces of clothes for spin is too few. | |||
| • Whether the blanket be rolled into a ball. |
Haier AWT-80LI washer error codes
| Error symbol: | Description: |
|---|---|
| Warning sign “!” | Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents otherwise it may cause damage of the machine or injure the personal safety of the user |
| Forbidding sign “ x ” | Contents marked with that symbol are actions forbidden to perform. Performing of those actions may result in damage of the machine or injure the personal safety of the user. |
Haier GWT950AW washer error codes
| Trouble Codes | Reason |
|---|---|
| LD | The draining does not work, or the speed of draining is too slow |
| UL | The washer is out of balance |
| LF | The water inlet time exceeds the preset time (40 minutes) |
| E6 | The water level sensor fault - Call service |
| F2 | Water overflow protection |
Haier HBF600TE washer error codes
| Error code: | Description: | Cause: | Correction: |
|---|---|---|---|
| Error 1 | The door lock light does not illuminate | Door is not properly shut | Shut the door properly |
| Error 2 | The door lock light glitters 2 times and stops 4 seconds repeatedly | Drainage error, water not emptied within 4 minutes | Clean the filter and check the drain hose for blockage. If error still exists, please contact the maintenance personnel |
| Error 3 | The door lock light glitters 3 times and stops 4 seconds repeatedly | Temperature sensor not properly connected or damaged | Contact the maintenance personnel |
| Error 4 | The door lock light glitters 4 times and stops 4 seconds repeatedly | Heating coil damage leads to a failure to reach the set temperature within the specified time (This message is display at the end of a program). | |
| Error 5 | The door lock light glitters 5 times and stops 4 seconds repeatedly | Water level not met in 8 minutes | Make sure that tap is turned on, and water pressure is normal |
| If problem still exists, please contact the maintenance personnel | |||
| Error 6 | The door lock light glitters 6 times and stops 4 seconds repeatedly | Timing control silicon damage | Contact the maintenance personnel |
| Error 7 | The door lock light glitters 7 times and stops 4 seconds repeatedly | Motor overheat protection or damage | |
| Error 8 | The door lock light glitters 8 times and stops 4 seconds repeatedly | Water exceeds protective level |
Haier Thermocool HWM110-287S washer error codes
| Error Codes: | Cause: |
|---|---|
| E 1 | Blockage of drain hose. |
| E 2 | Top lid not closed during wash operation |
| E 3 | The washer is out of balance |
| E 4 | Water inlet valve closed |
| The water pressure is too low | |
| E 5 | The water level sensor fault - Call service |
| E 7 | The communication fault - Call service |
| E 0 | Top lid not closed during delay start sequence |
Haier PFL1266W-E washer error codes
| Display message: | Cause: | Correction: |
|---|---|---|
| 1:25 | The remaining time is 1hour 25 minutes | |
| End | A program ends | |
| Err 1 | Door is not properly shut | Shut the door properly. |
| Err 2 | Drainage error, water not emptied within 4 minutes | Clean the filter and check the drain hose for blockage. If error still exists, please contact the maintenance personnel |
| Err 3 | Temperature sensor not properly connected or damaged | Contact the maintenance personnel |
| Err 4 | Heating coil damage or overload of laundry that leads to a failure to reach the set temperature within the specified time (This message is displayed at the end of a program). | Reduce load and then start washing again or contact the maintenance personnel |
| Err 5 | Water level not met in 8 minutes | Make sure that tap is turned on, and water pressure is normal. If problem still exists, please contact the maintenance personnel |
| Err 7 | Motor overheat protection or damage | Contact the maintenance personnel |
| Err 8 | Water exceeds protective level |