Whirlpool Washer LD Error Code

When the “LD” error code appears on the display of a Whirlpool washer, it typically means that the drain period is longer than acceptable and, therefore, there’s a problem with the drain hose installation or there is an object inside the hose. Refer to the video for visual instructions.
In most cases, to fix the washing machine, you’ll need to check whether the drain hose is installed right and whether it is free. Sometimes, fixing your washing machine will be as easy as just stretching out a kink on the drain hose.

Long Drain

Display Whirlpool Washer LD Error Code

Whirlpool Washer LD Error Code

Description Whirlpool Washer LD Error Code

Description Washer taking too long to drain water. Drain extends more than 4.5″ (114 mm) into the standpipe.
Potential Causes
  • Check plumbing for correct drain hose installation. Use drain hose form and attach securely to drainpipe or tub. Do not tape over drain opening.
  • Lower drain hose if the end is higher than 96″ (2.4 m) above the floor. Remove any clogs from the drain hose.
  • Check the following:
    Is the drain hose kinked or clogged?
    Is the drain hose installed properly? Press PAUSE/CANCEL to clear display.

Whirlpool Washer LD Error Code Fix